聚四氟乙烯薄膜在制作的时候怎么选材
发布时间:2017/11/16 9:41:45 来源: 浏览次数:
摘要:聚四氟乙烯薄膜第一、选材。聚四氟乙烯胶带的用料非常重要,良好的选材是至关重要的。目前,KCC黏胶和道康宁有机硅压敏胶是大部分厂家选用的
上一篇我们送上的文章是聚四氟乙烯薄膜的溶解参数为了更加全面的介绍聚四氟乙烯的各项性能、规格、参数等等,我们将持续发布最新知识,帮助大家了解更多的信息。
聚四氟乙烯薄膜制造具有珍珠母强度的材料在下一篇继续做详细介绍,如需了解更多,请持续关注。
本文由聚四氟乙烯薄膜在制作的时候怎么选材生产厂家gd55光大彩票于2017/11/16 9:41:45整理发布。
转载请注明出处:http://tianhesj.com/news/jusifuyixi-4367.html。
上一篇:聚四氟乙烯薄膜的溶解参数gd55光大彩票 聚四氟乙烯薄膜第一、选材。聚四氟乙烯胶带的用料非常重要,良好的选材是至关重要的。目前,KCC黏胶和道康宁有机硅压敏胶是大部分厂家选用的,他们之间有着很多区别,这就要我们厂家在生产的时候需要重点考虑的问题。道康宁有机硅压敏胶的耐温性非常好,但是也有其缺陷性,其粘性往往不是十分理想,而KCC初粘性比道康宁的要好一点。为了提高聚四氟乙烯胶带,耐高温性和初粘性,我们往往把两种有机硅压敏胶做适当的混合。经过多次调解配比,我们已经掌握了既能提高耐高温型又能提高初粘性的聚四氟乙烯胶带。另外,我司还引进了另一种进口的有机硅压敏胶,具有很强的初粘性和耐高温性,经过多次测试,效果非常好。
PTFE film first, material selection. PTFE tape material is very important, good material selection is essential. At present, KCC viscose and Dow Corning silicone pressure sensitive adhesive is used most of the manufacturers, there are many differences between them, this is our time in the production of the manufacturers need to focus on the issue. Dow Corning silicone pressure-sensitive adhesive temperature resistance is very good, but also has its defects, the initial viscosity is often not ideal, while the KCC tack a bit better than the Dow corning. In order to improve the high temperature resistance and initial adhesion of PTFE tapes, we often mix two kinds of silicone pressure sensitive adhesives properly. After several mediation ratio, we have mastered both the high temperature resistance and can improve the initial viscosity of PTFE tape. In addition, our company introduced another kind of imported silicone pressure-sensitive adhesive, which has strong initial viscosity and high
聚四氟乙烯薄膜第二、生产。生产工艺是产品质量的至关一步。我们要不断的优化工艺,不断的调节粘性,大幅度改善胶带成品的粘性,为此,我们控制好多种工艺参数,经过几年的实践,聚四氟乙烯胶带的粘性远远的得到了提高。聚四氟乙烯薄膜第三、使用。好的聚四氟乙烯胶带也需要非常好的使用方法。在使用铁氟龙胶带之前,我们要求客户首先要清除被贴表面的油污、杂质以及其它灰尘。还有,用了剩余的聚四氟乙烯胶带,我们要用塑料纸密封保存,否则,放在空气中,粘性会
下降。第四、保存。保存聚四氟乙烯胶带是一个很科学的问题。聚四氟乙烯胶带是不易露天存放在空气中太久的时间的。我们车间往往是露天存放的,但是置换快,一般一批货很快就会卖掉,而中断用户就要根据自己的实际情况做决定了。由于一般用户缺乏足够的保存环境,我们建议用户购买的时候库存保持1-2个月就好了。
temperature resistance. After many tests, the effect is very good.PTFE film second, production. Production process is a crucial tep in product quality. We have to constantly optimize the process, constantly adjust the viscosity, greatly improve the viscosity of adhesive tape products, therefore, we control a variety of process parameters, after several years of practice, the viscosity of PTFE tape has been greatly improved.PTFE film third, use. Good Teflon tape also requires a very good method of use. Before the use of Teflon tape, we require customers to be posted first to clear the surface oil, dust and other impurities. Also, with the remaining PTFE tape, we need to use plastic paper sealed storage, otherwise, put in the air, sticky willDescent. Fourth, save. It's a very scientific question to preserve Teflon tape. Teflon tape is not easy to open storage in the air too long. Our workshop is often open storage, but replacement fast, usually a lot of goods will soon sell, and the interruption of users will be based on their own actual situation to make a decision.Since the average user lacks sufficient storage environment, we recommend that the user keep the stock for 1-2 months at the time of purchase.
聚四氟乙烯薄膜制造具有珍珠母强度的材料在下一篇继续做详细介绍,如需了解更多,请持续关注。
本文由聚四氟乙烯薄膜在制作的时候怎么选材生产厂家gd55光大彩票于2017/11/16 9:41:45整理发布。
转载请注明出处:http://tianhesj.com/news/jusifuyixi-4367.html。
下一篇:聚四氟乙烯薄膜制造具有珍珠母强度的材料
相关新闻
- 聚四氟乙烯薄膜按工艺要求需要加入什么2018-08-20
- 聚四氟乙烯薄膜需要经过化学处理吗2018-08-09
- 聚四氟乙烯薄膜都有什么缺点2018-08-07
- 聚四氟乙烯薄膜服装膜和聚四氟乙烯薄膜空气过滤膜有什么区别2018-07-02
- 聚四氟乙烯薄膜生产工艺都有什么区别2018-06-26
- 聚四氟乙烯薄膜能紧密地包覆都有什么特性2018-06-25
- 聚四氟乙烯薄膜生产都是什么配方2018-06-20
- 聚四氟乙烯薄膜主要是是怎么制成的2018-06-20
相关产品